基本信息
型号:AO920N
货号 3KDE175533L9200
类型 :模拟输出
通道数 4
信号类型 0/4...20 mA 用于执行器
哈特 不
国企 不适用
冗余 不
本质安全 不
AO920N力学 S900系列远程 S900 I/O 系统可以安装在非危险区域,也可以直接安装在 1 区或 2 区危险区域,具体取决于所选的系统型号。S900 I/O 使用 PROFIBUS DP 标准与控制系统级进行通信。I/O系统可以直接安装在现场,因此降低了接线和布线的成本。
该系统坚固耐用,容错性强且易于维修。集成的断开机制允许在运行期间进行更换,这意味着无需中断初级电压即可更换电源单元。
S900 I/O N 型。用于安装在安全(= 非危险)区域。
AO920N 模拟量输出 (AO4I),执行器输出信号 0/4...20 mA。
AO920N特点和优势
- 冗余(电源和通信)
- 运行
中的热配置- 热插拔功能
- 扩展诊断
- 通过FDT/DTM
进行出色的配置和诊断- G3 – 所有组件
的涂层- 通过自动诊断
简化维护- 输出信号 0/4...20 mA 用于执行器
- 短路和断开检测
- 输出/总线和输出/电源之间的电气隔离- 电气隔离通道到通道
- 4 通道
Basic information
Model: AO920N
Item number 3KDE175533L9200
Type analog output
Number of channels 4
Signal type 0/4... 20 mA for actuators
Hatno
Not applicable to state-owned enterprises
Redundant not
Intrinsically safe
The AO920N Mechanics S900 Series Remote S900 I/O system can be installed in non-hazardous areas or directly in Zone 1 or Zone 2 hazardous areas, depending on the system model selected. The S900 I/O uses the PROFIBUS DP standard to communicate with the control system level. The I/O system can be installed directly on site, thus reducing wiring and cabling costs.
The system is robust, fault-tolerant and easy to service. The integrated disconnect mechanism allows for replacement during operation, which means that the power supply unit can be replaced without interrupting the primary voltage.
S900 I/O N type. For installation in safe (= non-hazardous) areas.
AO920N Analog Output (AO4I), actuator output signal 0/4... 20 mA.
AO920N Features and benefits
- Redundancy (power and communication)
- Run
In hot configuration - Hot swap function
- Extended diagnostics
- Via FDT/DTM
For excellent configuration and diagnostics - G3 - all components
The coating - through automatic diagnosis
Simplified maintenance - Output signal 0/4... 20 mA for actuators
- Short circuit and disconnect detection
- Electrical isolation between output/bus and output/power - Electrical isolation channel to channel
-4 channel
Copyright © 2022-2024 厦门雄霸电子商务有限公司 版权所有 备案号:闽ICP备14012685号-33