RLM01 3BDZ000398R1 冗余链路模块 用于增加网络稳定性和可靠性的设备

PROFIBUS冗余链路模块RLM01

将非冗余的PROFIBUS 链路转换为2条冗余链路，反之亦然。

只配备一个PROFIBUS DP接口的现场设备，可以通过冗余链路模块RLM01来集成到冗余的PROFIBUS总线网络。如同一个活跃的开关，RLM01将两条冗余链路转换为一条PROFIBUS DP链路，反之亦然。RLM01扩大信号形式和输入数据的振幅，并监控3条链路的活动和错误状态。

优点

3个PROFIBUS接口

透明的PROFIBUS 组态，无需从站地址。

支持的传输速率： 9.6 Kbps-12 Mbps

支持多达 31台PROFIBUS 客户端。采用中继器（光纤-电气）的情况下还可以扩展更多。

通过前面板的LED或是信号接触器来指示错误

8个接头的端子板可以读取特定信息来进行诊断

CE, UL和CSA认证

型式批准证书 "Germanischer Lloyd”可用于船舶行业

RLM01 3BDZ000398R1冗余链路模块（RLM）是用于增加网络稳定性和可靠性的设备。在由多台交换机组成的网络环境中，为了防止因单一链路故障导致的网络中断，通常会使用备份连接，即冗余链路。这些备份链路可以互相连接，形成一个环路，通过环路可以在一定程度上实现冗余。

RLM01 3BDZ000398R1冗余链路模块的主要功能是提供备份连接，以增强网络的健壮性和稳定性。在出现故障时，它可以快速地切换到备用链路，确保网络的正常运行。此外，冗余链路模块还可以提供负载均衡功能，将流量分散到多个链路上，以提高网络的吞吐量和响应速度。

在实际应用中，RLM01 3BDZ000398R1冗余链路模块可以与各种网络设备（如交换机、路由器等）配合使用。它可以通过标准接口（如以太网口）与这些设备连接，从而扩展了网络设备的连接能力和可靠性。

总的来说，冗余链路模块是一种重要的网络设备，它能够提高网络的稳定性和可靠性，确保网络的正常运行。

RLM01 3BDZ000398R1 冗余链路模块 用于增加网络稳定性和可靠性的设备

PROFIBUS Redundant link module RLM01

Convert a non-redundant PROFIBUS link to two redundant links and vice versa.

Field devices equipped with only one PROFIBUS DP interface can be integrated into redundant PROFIBUS bus networks via the redundant link module RLM01. Like an active switch, RLM01 converts two redundant links into one PROFIBUS DP link and vice versa. RLM01 amplifies the amplitude of the signal form and input data, and monitors the activity and error status of the three links.

advantage

Three PROFIBUS interfaces

Transparent PROFIBUS configuration without the need for a slave address.

Supported transfer rates: 9.6 Kbps-12 Mbps

Supports up to 31 PROFIBUS clients. Even more can be expanded with Repeaters (fiber-electrical).

Errors are indicated by the front panel LED or signal contactor

The 8-connector terminal board can read specific information for diagnosis

CE, UL and CSA certification

The Type Approval certificate "Germanischer Lloyd "can be used in the Marine industry

The RLM01 3BDZ000398R1 Redundant Link module (RLM) is a device used to increase network stability and reliability. In a network environment composed of multiple switches, to prevent network interruption caused by a single link failure, backup connections are usually used, that is, redundant links. These backup links can be connected to each other to form a loop through which redundancy can be achieved to a certain extent.

The main function of the RLM01 3BDZ000398R1 redundant link module is to provide backup connections to enhance network robustness and stability. In case of failure, it can quickly switch to the standby link to ensure the normal operation of the network. In addition, redundant link modules can also provide load balancing functions to spread traffic across multiple links to improve the throughput and response speed of the network.

In practical applications, the RLM01 3BDZ000398R1 redundant link module can be used with various network devices (such as switches, routers, etc.). It can be connected to these devices via standard interfaces, such as Ethernet ports, extending the connectivity and reliability of network devices.

In general, redundant link module is an important network equipment, which can improve the stability and reliability of the network and ensure the normal operation of the network.