LD 800HSE 3BDH000320R02  现场总线通信模件  可以实现冗余配置

型号：LD 800HSE 3BDH000320R02

LD 800HSE 3BDH000320R02 链接设备作为H1 链接和HSE 子网上现场设备间的网关来使用。

LD 800HSE 允许访问通过基金会现场总线(FF)集成到监控系统和管理控制台的现场设备。当2个链接设备的H1口连接到一个H1连接时，可以实现冗余配置。主要和次要链接设备间的独立冗余可以确保可靠的冗余故障转移和监控。

目前有两个不同版本可选，分别用于安全区域危险区域。

3BDH000320R02优点：

在FF 高速以太网（HSE）协议和多达4个 H1链接间建立连接

从主机系统连接H1设备的透明配置

允许进入H1设备（客户机/服务器）

四个独立的H1链接主站（LAS）

发布/订阅（H1)（高达4 个子循环）

复制从一个H1链接到另一个H1 ，或从H1 到HSE的数据

通过下载更新固件

LD 800HSE 3BDH000320R02  现场总线通信模件  可以实现冗余配置

Model: LD 800HSE 3BDH000320R02

The LD 800HSE 3BDH000320R02 Link device is used as the gateway between the H1 link and the field device on the HSE subnet.

The LD 800HSE allows access to field equipment integrated into monitoring systems and management consoles via the Foundation Fieldbus (FF). When the H1 ports of two connected devices are connected to one H1 connection, redundant configuration can be implemented. Independent redundancy between primary and secondary linked devices ensures reliable redundant failover and monitoring.

There are currently two different versions available, one for safe zones Dangerous zones.

3BDH000320R02 Advantages:

Establish connections between the FF High-Speed Ethernet (HSE) protocol and up to 4 H1 links

Transparent configuration for connecting H1 devices from the host system

Allow access to H1 devices (client/server)

Four independent H1 Link Hosts (LAS)

Publish/Subscribe (H1) (up to 4 subloops)

Copy data linked from one H1 to another H1, or from H1 to HSE

Update firmware by downloading