1771-OX 输出模块  用于控制设备的运行

Allen-Bradley 1771-OX是一款功率触点输出模块。该模块有 4 个 N.O./N.C. 输出点可用。该模块有四个状态指示灯，每个输出有 1 个指示灯。这些指示器表示输出继电器线圈的通电或断电状态。1771-OX 还具有一个保险丝，可作为过载情况的保护。在过载的情况下，输出电路将断开。

1771-OX 模块的额定电压为 0-250V AC RMS 和 0-175V DC。它的最大额定电流为 2 A，额定功率为 200 VA。该模块存在浪涌电流，峰值电流为 5.5A AC，持续 5 秒，6A DC 持续 500 秒，15A DC 持续 500 ms。请注意，浪涌电流每 10 秒可重复一次。该模块的最大导通状态接触电阻为 0.25 Ω，最大背板电流为 550 mA，隔离电压为 2500V AC RMS。

其功耗范围从最小 2.6 W 到最大 2.9 W。该模块还具有从最低 8.9 BTU/小时到最高 9.9 BTU/小时的散热范围。该 1771-OX 有一个工作温度为 0-60 ？？

1771-OX输出模块是一种用于将数字信号转换为模拟信号的电子模块，它通常用于控制执行器、电机、灯具等输出设备的运行。

输出模块通常包括一个或多个数字输入端口，用于接收来自控制器等数字设备的信号，以及一个或多个模拟输出端口，用于输出模拟信号。

1771-OX输出模块可以通过编程来实现各种控制任务，例如定时控制、顺序控制、逻辑控制等。输出模块通常具有高度的可靠性和稳定性，并且易于安装和配置。

输出模块可以用于各种应用，例如工业自动化、智能家居、医疗设备等。在这些应用中，输出模块可以用于控制设备的运行，以实现自动化和智能化控制。

1771-OX 输出模块  用于控制设备的运行

The Allen-Bradley 1771-OX is a power contact output module. The module has four N.O./N.C. output points available. The module has four status indicators, one for each output. These indicators indicate whether the output relay coil is powered on or off. The 1771-OX also has a fuse that acts as protection in case of overload. In case of overload, the output circuit will be disconnected.

The 1771-OX module is rated for 0-250V AC RMS and 0-175V DC. It has A maximum rated current of 2 A and a rated power of 200 VA. The module has A surge current with a peak current of 5.5A AC for 5 seconds, 6A DC for 500 seconds, and 15A DC for 500 ms. Please note that the surge current can be repeated every 10 seconds. The module has a maximum on-state contact resistance of 0.25Ω, a maximum backplane current of 550 mA, and an isolation voltage of 2500V AC RMS.

Its power consumption ranges from minimum 2.6W to maximum 2.9W. The module also has a heat dissipation range from a minimum of 8.9 BTU/ hour to a maximum of 9.9 BTU/ hour. The 1771-OX has an operating temperature of 0-60??

The 1771-OX output module is an electronic module used to convert digital signals to analog signals, which is commonly used to control the operation of output devices such as actuators, motors, lamps, etc.

The output module typically includes one or more digital input ports for receiving signals from digital devices such as controllers, and one or more analog output ports for outputting analog signals.

The 1771-OX output module can be programmed to implement various control tasks, such as timing control, sequential control, logic control, etc. Output modules typically have a high degree of reliability and stability, and are easy to install and configure.

The output modules can be used in a variety of applications, such as industrial automation, smart homes, medical devices, etc. In these applications, the output module can be used to control the operation of the equipment for automated and intelligent control.