1756-IRT6I-----温度测量模拟模块 用于电阻温度检测器（RTD）传感器

Allen-Bradley 1756-IR6I 是一款温度测量模拟模块。这是一个模拟模块，用于电阻温度检测器（RTD）传感器。

1756-IR6I 模块提供整数模式和浮点模式等两种数据格式。选择整数模式时，集成功能包括多个输入范围、陷波滤波器和实时采样。浮动模式包括所有这些功能，并增加了温度线性化、过程报警、速率报警和数字滤波。它还具有可选择的温度单位，例如摄氏度或华氏度。该模块有四 （4） 种可能的输入范围，包括 1 至 487 m？、2 至 1000 m？;4 至 2000 m？;，以及 8 至 4000 m？;。这些范围指定模块可检测到的最小和最大信号。它具有六 （6） 个独立隔离的 RTD 输入，分辨率为 16 位。实际分辨率包括 1-487 欧姆的 7.7 m？bit;2-1000 欧姆为 15 米/位，4 - 2000 欧姆为 30 米/位，8 - 4020 欧姆为 60 米/位。模块的陷波滤波器线路噪声滤波。确保选择与应用的预期噪声频率非常匹配的滤波器。数字滤波器通过消除每个输入通道上的噪声瞬变来平滑数据。

1756-IR6I 的实时采样功能允许模块通过扫描其所有输入通道收集的组播数据。要启用组播，请配置实时采样 （RTS） 周期和请求的数据包间隔 （RPI） 周期。

温度测量模拟模块是用来测量温度的模拟模块，具有16个通道，各通道分别率高达24位ADC，可以自由选择热电偶类型，提供了更高的精度和更大的灵活性。

温度测量模拟模块为模块化测量技术确立了标准，由于其快速的启动时间，无需等待即可记录数据。该模块非常紧凑和坚固，采用了无线磁连接技术，不仅节省了设置过程中的时间，还提供了高度安全的数据连接。此外，该模块还可以大大减少外部热影响或尽量避免受到环境温度波动所带来的干扰。

1756-IRT6I-----温度测量模拟模块 用于电阻温度检测器（RTD）传感器

Allen-Bradley 1756-IR6I is a temperature measurement simulation module. This is an analog module for resistance temperature detector (RTD) sensors.

The 1756-IR6I module provides two data formats, integer mode and floating-point mode. When selecting integer mode, integrated features include multiple input ranges, notch filters, and real-time sampling. The floating mode includes all of these features and adds temperature linearization, process alarm, rate alarm, and digital filtering. It also has selectable temperature units, such as degrees Celsius or Fahrenheit. The module has four (4) possible input ranges, including 1 to 487 m? , 2 to 1000 m? ; 4 to 2000 m? ; , and 8 to 4000 m? ; . These ranges specify the minimum and maximum signals that the module can detect. It has six (6) independently isolated RTD inputs with a resolution of 16 bits. The actual resolution includes 7.7 m of 1-487 ohms. bit; 2-1000 ohms are 15 m/bit, 4-2000 ohms are 30 m/bit, 8-4020 ohms are 60 m/bit. Module notch filter line noise filtering. Make sure to select a filter that closely matches the expected noise frequency of the application. Digital filters smooth the data by eliminating noise transients on each input channel.

The 1756-IR6I's real-time sampling feature allows the module to collect multicast data by scanning all of its input channels. To enable multicast, configure the real-time sampling (RTS) period and the requested Packet Interval (RPI) period.

The temperature measurement analog module is an analog module used to measure temperature, with 16 channels, each channel rate up to 24 bit ADC, can freely choose the thermocouple type, providing higher accuracy and greater flexibility.

The Temperature Measurement simulation module sets the standard for modular measurement technology, recording data without waiting due to its fast start-up time. The module is very compact and robust, and uses wireless magnetic connection technology, which not only saves time during setup, but also provides a highly secure data connection. In addition, the module can greatly reduce external thermal effects or minimize interference caused by ambient temperature fluctuations.