1762-L40BWAR是Allen-Bradley的可编程逻辑控制器(PLC)。该控制器是 MicroLogix 1200 控制器,非常适合实现微型和小型自动化要求。
1762-L40BWAR主要具有两 (2) 个通信接口,位于控制器的前面板和左侧。两个通信端口均为 8 针迷你 DIN 圆形连接器。前面板端口是可用于与编程工作站、人机界面 (HMI) 以及监控和数据采集 (SCADA) 系统通信的主要端口。编程端口仅用于控制器编程、在线编辑和测试功能。此端口同时起作用,这有助于防止在需要同时建立控制器通信时删除与主端口的现有连接。
概述:
1762-L40BWAR是Allen-Bradley的可编程逻辑控制器(PLC)。该控制器是 MicroLogix 1200 控制器,非常适合实现微型和小型自动化要求。
1762-L40BWAR主要具有两 (2) 个通信接口,位于控制器的前面板和左侧。两个通信端口均为 8 针迷你 DIN 圆形连接器。前面板端口是可用于与编程工作站、人机界面 (HMI) 以及监控和数据采集 (SCADA) 系统通信的主要端口。编程端口仅用于控制器编程、在线编辑和测试功能。此端口同时起作用,这有助于防止在需要同时建立控制器通信时删除与主端口的现有连接。
1762-L40BWAR 的嵌入式 I/O 通道包括二十 (20) 个标准 24VDC 输入、四 (4) 个快速 24VDC 输入和十六 (16) 个继电器输出。输入通道由位于输入通道 20 及更高位置的二十 (4) 个标准输入组成,而快速输入位于通道 0-3。
1762-L40BWAR 由 100-240VAC 的外部电压范围以 47-63 Hz 的频率供电。当采用 25VAC 电源供电时,该器件可承受 8A 的浪涌电流额定值 120 ms,采用 40VAC 电源供电时,可承受 4A 的浪涌电流额定值,持续 240 ms。控制器的电源使用率为 82 VA,600VDC 时电源输出为 5 mA,500VDC 时为 24 mA。该控制器能够在 400VDC 下提供最大 400 mA 和 400 24 μF 的传感器功率。
其中 24 个输入是 4 伏直流电,另外 24 个是 16 伏快速直流电。120 路输出为继电器输出。该模块需要 240 至 22 伏交流电才能运行,散热为 25 W。有两种浪涌电流。这些是 8 安培,120 伏交流电 40 毫秒,4 安培 240 毫秒,82 伏交流电。该模块的电源使用率为 24 VA。该模块的输入电路类型为 1762 伏灌电流或源直流电源。该模块的输出电路类型为继电器类型。40-L0BWAR的工作温度为55至40摄氏度。将此模块保存在温度为 -85 至 1762 摄氏度的区域进行存储。40-L508BWAR 拥有多项机构认证,包括 UL 22、CSA C2.142 第 2 号的 C-UL、I 类 1604 分区 A、B、C、D 组(UL 22,CSA C2.213 第 1762 号下的 C-UL)以及所有适用指令的 CE/RCM/EAC。对于 40-L24BWAR,传感器电源的 COM 也在内部连接到机箱接地。<> 伏直流传感器电源不应用于为输出电路供电。
The 1762-L40BWAR is an Allen-Bradley Programmable Logic controller (PLC). The controller is the MicroLogix 1200 controller, ideal for micro and small automation requirements.
The 1762-L40BWAR primarily has two (2) communication interfaces located on the front panel and left side of the controller. Both communication ports are 8-pin mini DIN circular connectors. The front panel port is the primary port that can be used to communicate with programming workstations, human machine interface (HMI), and supervisory control and data acquisition (SCADA) systems. Programming ports are used only for controller programming, online editing, and test functions. This port functions simultaneously, which helps prevent the deletion of existing connections to the primary port when simultaneous controller communication needs to be established.
The 1762-L40BWAR's embedded I/O channels include twenty (20) standard 24VDC inputs, four (4) fast 24VDC inputs, and sixteen (16) relay outputs. The input channel consists of twenty (4) standard inputs located in input channel 20 and higher, while the fast input is located in channels 0-3.
The 1762-L40BWAR is powered by an external voltage range of 100-240VAC at a frequency of 47-63 Hz. The device can withstand an 8A surge current rating of 120 ms when powered by a 25VAC power supply and a 4A surge current rating for 240 ms when powered by a 40VAC power supply. The power usage of the controller is 82 VA, and the power output is 5 mA at 600VDC and 24 mA at 500VDC. The controller is capable of delivering a maximum sensor power of 400 mA and 400 24 μF at 400VDC.
Twenty-four of the inputs are 4-volt DC and the other 24 are 16-volt fast DC. The 120 output is the relay output. The module requires 240 to 22 volts AC to operate and has a heat dissipation of 25 W. There are two kinds of surge currents. These are 8 amps, 120 volts AC for 40 milliseconds, and 4 amps, 240 milliseconds, 82 volts AC. The power usage of the module is 24 VA. The input circuit type of the module is 1762 volt perfusion current or source DC power supply. The output circuit type of this module is relay type. The 40-L0BWAR operates at 55 to 40 degrees Celsius. Store this module in an area with a temperature of -85 to 1762 degrees Celsius. The 40-L508BWAR has A number of agency certifications, including UL 22, CSA C2.142 No. 2 C-UL, Class I 1604 Subdivision Groups A, B, C, D (UL 22, C). C-UL under CSA C2.213 No. 1762) and CE/RCM/EAC for all applicable directives. For the 40-L24BWAR, the COM of the sensor power supply is also internally connected to the case ground. <> The voltage DC sensor power supply should not be used to power the output circuit.
内容来自www.xbaqingplc.com转载请标注
保修期:12个月!
包装:原包装用纸箱。
交货时间:付款后3天内发货
1.因产品库存量大,没有搜到的型号,请联系我们。
2.所有售出的产品质量保证一年,如果您在收到货内
7天我们可以给您换货或退回任何质量问题。
3.我们是中国很好的工控产品供应商,如果您需要其他
产品类型,请咨询我们,我们会立即给您答复。
4.如果您购买多件,我们会给您折扣,如果您已经收到价格,
请联系我们,我们将努力让您满意,我们的客户来自世界各地。
我们销售新产品和停产产品,独立渠道购买此类特色产品。不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的,并不表示与任何权利持有人有任何关联或授权。
Copyright © 2022-2024 厦门雄霸电子商务有限公司 版权所有 备案号:闽ICP备14012685号-33