您好,欢迎进入厦门雄霸电子商务有限公司!

全国咨询热线

18059884797

热门关键词: ABB GE A-B TRICONEX Schneider

1336-PB-SP2B 460伏交流额定PCB 变频驱动器

1336-PB-SP23B板是由Allen-Bradley制造的460伏交流额定PCB。它是一个预充电PCB输出功率额定值为60至600马力。PCB的工作频率范围在50到60赫兹之间,具体取决于艾伦-布拉德利1336系列变频驱动器上的负载。它是由艾伦-布拉德利/罗克韦尔自动化制造的备件。1336-PB-SP23B PCB是高效的,完全兼容各种Allen-Bradley制造的驱动器。该电路板接受低输入功率并将其放大为高输入电流,用于驱动器中不同组件的操作。它也可以作为电流放大器,因为它改变电流水平从一种状态到另一种。

联系电话:18059884797

产品详情

1336-PB-SP2B  460伏交流额定PCB 变频驱动器


 概述:

 

1336-PB-SP23B板是由Allen-Bradley制造的460伏交流额定PCB。它是一个预充电PCB输出功率额定值为60至600马力。PCB的工作频率范围在50到60赫兹之间,具体取决于艾伦-布拉德利1336系列变频驱动器上的负载。它是由艾伦-布拉德利/罗克韦尔自动化制造的备件。1336-PB-SP23B PCB是高效的,完全兼容各种Allen-Bradley制造的驱动器。该电路板接受低输入功率并将其放大为高输入电流,用于驱动器中不同组件的操作。它也可以作为电流放大器,因为它改变电流水平从一种状态到另一种。


Allen-Bradley 1336-PB-SP23B电路板在潮湿的环境中可能会损坏,因此应防止恶劣的天气条件。这个PCB不防水,它应该只用于室内应用。由于PCB安装在变频器主控板的下方,因此在安装过程中,PCB所连接的变频驱动器应适当接地。安装区域附近不能有电磁噪声的痕迹。1336-PB-SP23B单板满足不同行业标准的所有规格要求。应采用接地系统,以尽量减少对电路板的电气干扰。为保证设备的正常运行,安装环境应保持在0 ~ 50℃的温度范围内。


 

内容来自www.xbaqingplc.com转载请标注

 

1336-PB-SP2B  460伏交流额定PCB 变频驱动器


1336-PB-SP2B.jpg


The 1336-PB-SP23B board is a 460 Volts AC rated PCB manufactured by Allen-Bradley.  It is a precharge PCB with an output power rating of 60 to 600 Horsepower.  The PCB's operating frequency ranges between 50 and 60 Hertz depending on the load on the Allen-Bradley 1336 series variable frequency drive that it is attached to.  It is a spare part manufactured by Allen-Bradley/Rockwell Automation.  The 1336-PB-SP23B PCB is efficient and fully compatible with a variety of Allen-Bradley manufactured drives.  The board takes in low input power and amplifies it into a high input current which is used for the operation of different components in the drive.  It can also be taken as a current amplifier as it changes the current level from one state to another.


The Allen-Bradley 1336-PB-SP23B board should be protected against harsh weather conditions because it can be damaged by moist environments.  This PCB is not waterproof and it should be used for indoor applications only.  The variable frequency drive that the PCB is attached to should be properly earthed during the installation process because the PCB is installed beneath the main control board of the drive.  No traces of electromagnetic noise should be present near the installation area.  The 1336-PB-SP23B board meets all the specifications that are required to meet different industrial standards.  A grounding system should be used to minimize the electrical interference to the board.  A specified temperature range between 0 and 50 degrees Celsius should be maintained in the installation environment for proper operation.


 

1336-PB-SP2B  460伏交流额定PCB 变频驱动器

姗姗名片合并2(1).jpg


1.因产品库存量大,没有搜到的型号,请联系我们。

2.所有售出的产品质量保证一年,如果您在收到货内

7天我们可以给您换货或退回任何质量问题。

3.我们是中国很好的工控产品供应商,如果您需要其他

 产品类型,请咨询我们,我们会立即给您答复。

4.如果您购买多件,我们会给您折扣,如果您已经收到价格,

请联系我们,我们将努力让您满意,我们的客户来自世界各地。


查看更多 >>

产品推荐

18059884797