1203-GK5 模块的输入电压为12-25伏直流

概述：

1203-GK5模块安装在DIN导轨系统上，并使用SCANport电缆连接到SCANport产品。模块上的一些功能包括拨码开关，使用户能够在将模块连接到DeviceNet网络之前对模块进行配置。该模块还具有故障节点恢复系统，可以更改设备的节点地址。用户故障响应配置允许用户自定义适配器对通信错误的操作，led有助于诊断网络和SCANport健康。安装1203-GK5所需的工具和设备如下:DeviceNet通信模块(1203-GK5)、5pin或10pin插件连接器、35 × 7.5 mm DIN导轨、1/8”一字螺丝刀以及用于SCANport和DeviceNet连接的相应线缆。

1203-GK5模块的规格包括输入电压为12至25 V DC，输入电流为110 mA, SCANport负载为60 mA。环境规范包括工作温度在0 ~ 50℃之间，存储温度在-40 ~ 85℃之间，相对湿度在0 ~ 95%之间(无冷凝)。通信规格波特率有:1225k BPS、250k BPS和500k BPS。该设备的机械尺寸包括76毫米(3.0英寸)的高度，45毫米(1.8英寸)的宽度，123毫米(4.8英寸)的深度，NEMA 1型外壳，和35毫米× 7.5毫米(1.38英寸)的DIN轨道标准。X 0.30英寸)。

内容来自www.xbaqingplc.com转载请标注

1203-GK5 模块的输入电压为12-25伏直流

The 1203-GK5 module is mounted on a DIN rail system and is connected to SCANport products using SCANport cables. Some of the features on the module include dip switches that enable users to configure the module before connecting it to the DeviceNet network. The module also has a failed node recovery system, which can change the node address of the device. User fault response configuration allows users to customize the adapter's actions for communication errors, and leds help diagnose network and SCANport health. The following tools and equipment are required to install the 1203-GK5 :DeviceNet communication module (1203-GK5), 5-PIN or 10-pin plug-in connectors, 35 x 7.5 mm DIN rail, 1/8 "flat-head screwdriver, and appropriate cables for connecting SCANport to DeviceNet.

The specifications for the 1203-GK5 module include input voltages of 12 to 25 V DC, input currents of 110 mA, and SCANport loads of 60 mA. Environmental specifications include operating temperatures between 0 and 50 ° C, storage temperatures between -40 and 85 ° C, and relative humidity between 0 and 95% (non-condensing). The baud rate is 1225k BPS, 250k BPS, and 500k BPS. The mechanical dimensions of the device include a height of 76 mm (3.0 in), a width of 45 mm (1.8 in), a depth of 123 mm (4.8 in), a NEMA Type 1 housing, and a DIN track standard of 35 mm by 7.5 mm (1.38 in). X 0.30 inches).

1.因产品库存量大，没有搜到的型号，请联系我们。

2.所有售出的产品质量保证一年，如果您在收到货内

7天我们可以给您换货或退回任何质量问题。

3.我们是中国很好的工控产品供应商，如果您需要其他

 产品类型，请咨询我们，我们会立即给您答复。

4.如果您购买多件，我们会给您折扣，如果您已经收到价格，

请联系我们，我们将努力让您满意，我们的客户来自世界各地。