2094-BC04-M03-M  | 集成轴模块  |  具有转换器和逆变器部分

零件编号/目录号：2094-BC04-M03-M

模块位置 ：电源轨的最左边

内部分流器峰值功率 :22.5 千瓦

内部并联连续电源 :200瓦

PWM频率:4 千赫兹

带宽 速度环线：500 Hz 电流环路：1300 Hz

输入电压范围 :400/460伏交流电

逆变器部分输出电流 :30 安培

转换器部分输出:28 千瓦

功耗 :94-255 瓦

工作温度 :32-122 F （0-50摄氏度）

产品描述 ：集成轴模块

制造者：罗克韦尔自动化

2094-BC04-M03-M该模块具有转换器和逆变器部分。变频器部分的输出额定功率为 28kW，逆变器的额定输出为 30 安培。该模块也称为增材制造电源模块。它随附一个接线插头连接器组，用于电机功率 （MP） 和电机/电阻制动功率 （BC）。2094-BC04-M03-M该模块不提供连接器套件输入和输出接口、安全和辅助反馈信号，目录号为 2090-K6CK-D44M 和 2090-K6CK-D44S0，电机反馈目录号为 2090-K6CK-D15M。

使用此模块时，并不总是需要接地跳线设置。但是，未接地或高阻抗电源配置需要接地跳线设置。要设置接地跳线设置，2094-BC04-M03-M请从电源轨上移除集成接入模块 （IAM），打开电源模块并将跳线位置修改到适当的位置。默认情况下，模块设置为接地位置，其中 P16 和 P17 短路，而未接地配置的 P18 和 P19 端子短路。

Part Number/Catalog number: 2094-BC04-M03-M

Module position: leftmost of the power rail

Internal shunt peak power :22.5 kW

Internal parallel continuous power supply :200 watts

PWM frequency :4 KHZ

Bandwidth Speed loop: 500 Hz Current loop: 1300 Hz

Input voltage range :400/460 volts AC

Inverter part output current :30 amps

Converter part output :28 kW

Power consumption :94-255 watts

Operating temperature :32-122 F (0-50 C)

Product description: Integrated shaft module

Manufacturer: Rockwell Automation

2094-BC04-M03-M This module has a converter and an inverter section. The inverter part has an output rated power of 28kW and the inverter has a rated output of 30 amps. The module is also known as the additive manufacturing power module. It comes with a wiring plug connector set for motor power (MP) and motor/resistance braking power (BC). 2094-BC04-M03-M The module does not provide connector kit input and output interfaces, safety and auxiliary feedback signals, catalog numbers 2090-K6CK-D44M and 2090-K6CK-D44S0, and motor feedback catalog number 2090-K6CK-D15M.

When using this module, it is not always necessary to ground jumper Settings. However, ungrounded or high-impedance power supply configurations require ground jumper Settings. To set the ground jumper Settings, 2094-BC04-M03-M Remove the Integrated Access Module (IAM) from the power rail, turn on the power module and change the jumper position to the appropriate position. By default, the module is set to the ground position, where P16 and P17 are short-circuited, while ungrounded terminals P18 and P19 are short-circuited.