您好,欢迎进入厦门雄霸电子商务有限公司!

全国咨询热线

18059884797

热门关键词: ABB GE A-B TRICONEX Schneider

2094-PRS6 | 超薄电源轨 | 具有 6 个逆变器插槽或轴

品牌 艾伦-布拉德利

零件编号/目录号 2094-PRS6型

模块类型 超薄电源轨

应用 230 或 460 伏驱动系统


模块容量 :1 个 IAM,5 个附加

轴数 6轴

尺寸 :19.3 x 16.1 x 7.7 英寸(490.2 x 408.9 x 195.6 毫米)

重量:7.8磅(3.55千克)


联系电话:18059884797

产品详情

2094-PRS6  |  超薄电源轨  | 具有 6 个逆变器插槽或轴

2094-PRS6.png

品牌 艾伦-布拉德利

零件编号/目录号 2094-PRS6型

模块类型 超薄电源轨

应用 230 或 460 伏驱动系统


模块容量 :1 个 IAM,5 个附加

轴数 6轴

尺寸 :19.3 x 16.1 x 7.7 英寸(490.2 x 408.9 x 195.6 毫米)

重量:7.8磅(3.55千克)


Allen-Bradley 2094-PRS6 是一款纤细的电源轨,具有 6 个逆变器插槽或轴,驱动模块安装在其上。这 6 个轴带有一个转换器轴。这款 6 轴电源轨是 3 维的,尺寸为 49.02 厘米(19.3 英寸)x 40.89 厘米(16.1 英寸)x 19.56 厘米(7.7 英寸)。2094-PRS6 重 3.55 千克(7.8 磅)。


如果使用双宽 IAM 模块(如 2094-BC04-M03-S 和 2094-BC07-M05-S),则占用四个逆变器插槽,因为它们占用了电源轨的两个逆变器孔。2094-BM03-S 和 2094-BM05-S 等安讯士模块也填充了双逆变器插槽。转换器插槽位于电源跟踪的最左侧,仅供 IAM 使用。其余插槽均为逆变器插槽。


2094-PRS6 仅适用于需要 6 个轴(逆变器孔)的 230V 或 460V 驱动系统。因此,用户在选择电源轨时需要确定安装导轨安装模块所需的最小轴数。在安装和接线之前,不应打开系统,因为即使在系统关闭后,连接器端子仍会保留一些电压。

2094-PRS6.png

Brand Allen Bradley

Part Number/Catalog Number 2094-PRS6

Module Type Ultra-thin power rail

Application of 230 or 460 volt drive systems


Module capacity: 1 IAM and 5 additional modules

Number of axes 6 axes

Dimensions: 19.3 x 16.1 x 7.7 inches (490.2 x 408.9 x 195.6 mm)

Weight: 7.8 pounds (3.55 kg)

The Allen-Bradley 2094-PRS6 is a slim power rail with six inverter slots or shafts on which the drive module is mounted. These 6 axes have a converter shaft. The 6-axis power rail is 3-dimensional and measures 49.02 cm (19.3 in) x 40.89 cm (16.1 in) x 19.56 cm (7.7 in). The 2094-PRS6 weighs 3.55 kg (7.8 lb).


If double-width IAM modules are used (such as 2094-BC04-M03-S and 2094-BC07-M05-S), four inverter slots are occupied because they occupy two inverter holes in the power rail. Axis modules such as 2094-BM03-S and 2094-BM05-S are also filled with dual inverter slots. The converter slot is located on the far left of the power trace and is used only by IAM. Other slots are inverter slots.


The 2094-PRS6 is only suitable for 230V or 460V drive systems that require 6 shafts (inverter holes). Therefore, when selecting the power rail, the user needs to determine the minimum number of shafts required to install the rail mounting module. The system should not be turned on before installation and wiring, as the connector terminals retain some voltage even after the system is turned off.

XB名片.png

查看更多 >>

产品推荐

18059884797