1771-IBDB  I/O机箱  接收电源背板由机箱供电

型号：1771-IBDB

1771-IBDB系列B模块兼容所有机箱

1771-A1, 1771-A2, 1771-A4底盘。    确保没有其他输入模块或单卡块传输模块放置在相同的位置使用双槽寻址时的模块组。   任意离散输出模块可以在同一模块组中使用。

1771-IBD系列B模块具有可选择的关闭延迟滤波器时间1ms或6ms。

如果这个产品有CE标志，它被批准安装在欧盟和欧洲经济区地区。    它已经被设计和经过测试，符合以下指令。

电磁兼容指令

本产品经过测试，符合理事会指令89/336/EEC

电磁兼容性(EMC)和以下标准:

全部或部分记录在技术施工文件中的:

•EN 50081-2EMC -通用发射标准，

第2部分-工业环境

•EN 50082-2EMC -通用抗扰度标准，本产品适用于工业环境。

您的模块通过1771-IBDB  I/O机箱接收电源背板由机箱供电。    该模块要求130mA从这个电源的输出。    计算需求对于背板电源，增加130mA的电源I/O机箱中所有其他模块的要求。    计算要求防止机箱背板过载和/或背板电源。

注意:从1771 I/O上拆下电源

机箱背板和现场接线臂前拆卸或安装I/O模块。

•未能从背板或接线臂上取下电源可能会导致模块损坏或降级

表现，还是受伤。

•从背板上拔出电源失败可能导致故障可能造成人身伤害或设备损坏意想不到的操作。

重要:您可以直接在直流(10-30V)上驱动端子。

输入模块不。1771-IBD系列B

以下模块的终端:

•DC (10-30V)输出模块(cat。不。1771 - obn)

•DC (10-60V)输出模块(cat。不。1771 - obd)

•DC (12-24V)输出模块(cat。不。1771 - ob)

•直流(24V)输出模块(cat。不。1771 (oq)

•直流(24V)输出模块(cat。不。1771 - oq16)

重要提示:两个模块使用相同的直流电源供电

以确保地具有相同的电势。

Model: 1771-IBDB

The 1771-IBDB Series B module is compatible with all chassis

Chassis 1771-A1, 1771-A2, 1771-A4. Ensure that no other input module or single card block transfer module is placed in the same location as the module group when using two-slot addressing. Any discrete output module can be used in the same module group.

The 1771-IBD Series B module has a selectable turn-off delay filter time of 1ms or 6ms.

If this product has the CE mark, it is approved for installation in the European Union and the European Economic Area. It has been designed and tested to comply with the following instructions.

Electromagnetic compatibility instruction

This product has been tested to comply with Council Directive 89/336/EEC

Electromagnetic compatibility (EMC) and the following standards:

Recorded in whole or in part in technical construction documents:

EN 50081-2EMC - General Emission Standard,

Part 2 - Industrial environment

•EN 50082-2EMC - General Immunity standard, this product is suitable for industrial environments.

Your module receives power through the 1771-IBDB I/O chassis and the backplane is powered by the chassis. The module requires 130mA output from this power supply. Computing Requirements For the backplane power supply, add the requirements for all other modules in the 130mA power I/O chassis. Calculation requirements Prevent chassis backplane overload and/or backplane power supply.

Note: Remove power supply from 1771 I/O

Remove or install the I/O module before the chassis backplane and field wiring arm.

• Failure to remove the power supply from the backplane or the wiring  arm may result in damage or degradation of the module

Performance, or injury.

• Failure to remove the power supply from the backplane may result in a fault Unexpected operations that may cause personal injury or device damage.

Important: You can drive the terminals directly on DC (10-30V).

Input module no. 1771-IBD Series B

Terminals for the following modules:

•DC (10-30V) output module (cat. Nooooo. 1771 - obn)

•DC (10-60V) output module (cat. Nooooo. 1771 - obd)

•DC (12-24V) output module (cat. Nooooo. 1771 - ob)

• DC (24V) output module (cat. Nooooo. 1771 (oq)

• DC (24V) output module (cat. Nooooo. 1771 - oq16)

Important: Both modules use the same DC power supply

To make sure they have the same potential.