FC-TSAI-1620M HONEYWELL 安全管理器系统模块

制造商:霍尼韦尔

·产品编号:FC-SAl-1620M

·产品类型:安全管理器系统模块

·安全高密度模拟输入模块(24 Vdc,16通道)SAl-1620m运输重量:3公斤

输入输出模块也称为控制模块，在有控制要求时可以输出信号，或者提供一个开关量信号，使被控设备动作，同时可以接收设备的反馈信号，以向主机报告，是火灾报警联动系统中重要的组成部分，市场上的输入输出模块都可以提供一对无源常开/常闭触点，用以控制被控设备，部分厂家的模块可以通过参数设定，设置成有源输出(如海湾GST-LD-8301),相对应的还有双输入输出模块、多输入输出模块等等。

火灾报警时，报警控制器通过输出模块启动需要联动的外控设备，如防排非烟阀、送风阀、防火卷帘门、风机、警铃等，并可接受设备的动作回答.输出模块连接在控制器的回路总线上，可以安装在所控设备的附近，也可安装在楼层端子模块箱内。采用电子写码，可以现场编码。输出模块的输出控制逻缉可以根据工程情况编程完成。当控制器接收到探测器的报警信号后，根据预先编入的程序，控制器通过总线将联动控制信号输送到输出模块，输出模块启动需要联动的消防设备;设备动作后会接受一个信号回答。

FC-TSAI-1620M产品参数

·输入电缆类型:16通道单端或差分输入

·输入范围:根据模块内置的转换器而定，最大输入范围为士100V·转换精度:16位

。采样时间:根据输入通道数而定，最快采样时间为8ms/通道。通信接口:RS-485 (Modbus RTU)

·外形尺寸:160mm x 100mm x 35mm。工作温度:-40°C ~ +85°℃

·电源电压:12V ~32v DC·电源功耗:最大功耗5W应用领域

FC-TSA-1620M广泛应用于工业自动化、过程控制、监测系统等领域。适用于环境恶劣、信号干扰严重的场合，具有高精度、高稳定性和高可靠性的特点。可与PlDCS、PC等各种控制系统配合使用，实现过程变量的实时监测和控制。

FC-TSAI-1620M HONEYWELL 安全管理器系统模块

Manufacturer: Honeywell

· Product Number :FC-SAl-1620M

· Product type: Security Manager system module

· Secure high-density analog input module (24 Vdc,16 channels)SAl-1620m Transport weight :3 kg

Input/output module is also known as the control module, when there are control requirements can output signals, or provide a switching signal, so that the controlled device action, at the same time can receive the feedback signal of the device, to report to the host, is an important part of the fire alarm linkage system, the input/output module on the market can provide a pair of passive normally open/normally closed contacts. In order to control the controlled equipment, some manufacturers' modules can be set to active output (such as Gulf GST-LD-8301) through parameter setting, corresponding to double input output module, multi-input output module and so on.

When the fire alarm occurs, the alarm controller starts the external control equipment that needs to be linked through the output module, such as the anti-exhaust non-smoke valve, air supply valve, fire shutter door, fan, alarm bell, etc., and can accept the action of the equipment. The output module is connected to the loop bus of the controller and can be installed near the control device or in the floor terminal module box. Using electronic coding, can be field coding. The output control logic of the output module can be programmed according to the project situation. When the controller receives the alarm signal of the detector, according to the pre-programmed program, the controller transmits the linkage control signal to the output module through the bus, and the output module starts the fire fighting equipment that needs linkage; The device responds with a signal when it acts.

FC-TSAI-1620M Product parameters

· Input cable type: 16-channel single-ended or differential input

· Input range: Depending on the built-in converter of the module, the maximum input range is 100V· Conversion accuracy :16 bits

. Sampling time: Depending on the number of input channels, the fastest sampling time is 8ms/ channel. Communication interface :RS-485 (Modbus RTU)

· Overall dimensions :160mm x 100mm x 35mm Operating temperature :-40°C ~ +85° C

· Power supply voltage :12V ~32v DC· Power consumption: maximum power consumption 5W Application field

FC-TSA-1620M is widely used in industrial automation, process control, monitoring systems and other fields. It is suitable for the occasion of harsh environment and serious signal interference, and has the characteristics of high precision, high stability and high reliability. It can be used with PlDCS, PC and other control systems to realize real-time monitoring and control of process variables.