05704-A-0121 HONEYWELL 四路继电器接卡/数字光源控制卡

制造商:霍尼韦尔

产品编号:05704-A-0121

产品类型:四路继电器接卡

运输重量:4公斤

接力:12次SPCO。4x SPST.

现场端子:2.5mm2 (14 AWG).

功率:6.5W(最大值)3.5W(典型值)。

·尺寸(长x宽x高)，约为:12.2厘米x5.2厘米x 13.2厘米。

重量:0.5公斤

装运重量:1.5千克

HONEYWELL 0570系列模块05704-A-0121、05701-A-0330、05701-A-0351、05701-A-0302、05704-A-0144

4通道数字光源控制卡-4通道数字光源控制卡批发05704-A-0145四通控制卡05704-A-0121霍尼韦尔控制卡Honeywell控制卡使用过程PLC系统备件工控卡件在多路复用模式下,SCXI模块的所有输入通道被多路复用为DAQ设备的单个模拟输入通道

1、用PLC的编程软件接上PLC测试看看PLC的参数是多少，工程里设置的参数是否和测试出来的一致。

2、在线模拟:用我们的组态软件，用PLC本身的通讯电缆和电脑相连接，在线模拟看看工程是否通讯的上。可以用个数值输入部件或是开关，对其操作，看看关掉模拟器之后再开在线模拟后之前的操作是否还在，是否直接提示NC。(NC和之前操作没有写下去即为没有通上)

05704-A-0121测试线:

用万用表按照接线图的引脚定义测试接线。

—:角中摸屏的参数。查看一下触摸屏的参数设置

这里面有几个参数需要特别注意的:

1:通信口的设置- - -一定要确认清楚PLC连接触摸屏的COM1口还是COM2口

2:设备类型- - -这个是最重要的，如果协议没选对的话，其他就不用说了

3:连接方式- - - PLC跟触摸屏的连线，确认好事RS485，还是RS232C

4:接口参数跟PLC站号---—定要跟PLC里面的设置一致。

二:如果参数确认设置好了，接下来就排查线路的问题

确认RS485,RS232C的做线是否正确，触摸屏与各种PLC接线的做法不一样。这个可以参照维控(plc与触摸屏通信线接法帮助文档)查看，这个是正常排查通信问题的基本方法。

常见问题

无论您对库存，价格，故障排除还是其他方面有任何疑问，我们都能满足您的需求。请致电我们，填写我们的表格，或向我们发送电子邮件–任何适合您的方式。期待您的回音!

问:你们的商品是新的和原创的吗?

答:是的，它们是新的和原创的问:您的交货时间如何?

答:我们有很多库存商品，3-5天您将收到它。问:你们提供保修吗?

答:是的，我们为所有剩余的部件提供1年保修。问:你们提供保修吗?

答:是的，我们为所有剩余的部件提供1年保修。问:您可以接受哪些付款方式?

答:通常我们在中国大陆接受T/T和人民币转账

05704-A-0121 HONEYWELL 四路继电器接卡/数字光源控制卡

Manufacturer: Honeywell

Product Number :05704-A-0121

Product type: four-way relay adapter

Shipping weight :4 kg

Relay :12 SPCO. 4x SPST.

Field terminal :2.5mm2 (14 AWG).

Power :6.5W(Max)3.5W(typical).

· Dimensions (L x W x H), approximately :12.2 cm x5.2 cm x 13.2 cm.

Weight :0.5 kg

Shipping weight :1.5 kg

HONEYWELL 0570 series modules 05704-A-0121, 05701-A-0330, 05701-A-0351, 05701-A-0302, 05704-A-0144

4-channel digital light source control card - 4-channel digital light source control card wholesale 05704-A-0145 four-way control card 05704-A-0121 Honeywell Control card Use process PLC system spare parts Industrial control card In the multiplexing mode, all the input channels of the SCXI module are multiplexed into DAQ devices Single analog input channel

1. Use PLC programming software to connect PLC test to see what the PLC parameters are, and whether the parameters set in the project are consistent with those tested.

2, online simulation: with our configuration software, with the PLC itself communication cable and computer connection, online simulation to see whether the project communication on. You can use a numerical input component or switch to operate it, and check whether the previous operation is still in place after turning off the simulator and then on the online simulation, and whether you can directly prompt NC. (NC and the previous operation is not written down, which is not connected)

05704-A-0121 Test line:

Use a multimeter to define the test wiring according to the pins of the wiring diagram.

- : Specifies the parameters for touching the screen in the corner. Take a look at the parameters on the touch screen

There are a few parameters that need special attention:

1: The setting of the communication port -- be sure to confirm whether the PLC is connected to the COM1 port or COM2 port of the touch screen

2: Device type - this is the most important, if the protocol is not chosen correctly, the other goes without saying

3: Connection mode -- PLC and touch screen connection, confirm the good RS485, or RS232C

4: Interface parameters and PLC station number - must be consistent with the Settings in the PLC.

Two: If the parameters are confirmed and set, then check the problem of the line

Confirm whether the wiring of RS485 and RS232C is correct, and the touch screen is different from the wiring of various PLC. This can be viewed by referring to the maintenance control (plc and touch screen communication line connection help document), which is the basic method for normal troubleshooting of communication problems.

Q&A

Whether you have any questions about inventory, pricing, troubleshooting or anything else, we can meet your needs. Please call us, fill out our form, or send us an email - whatever works for you. Looking forward to hearing from you!

Q: Are your products new and original?

A: Yes, they are new and original Q: What is your lead time?

A: We have many items in stock and you will receive it in 3-5 days. Q: Do you offer a warranty?

A: Yes, we offer a 1 year warranty on all remaining parts. Q: Do you offer a warranty?

A: Yes, we offer a 1 year warranty on all remaining parts. Q: What payment methods do you accept?