05701-A-0502 HONEYWELL电源适配器 是系统的中枢神经

05701-A-0502 HONEYWELL电源适配器

产品参数

.品牌:HONEYWELL

·型号:05701-A-0502

·重量:100克

.外壳材质:塑料

.尺寸: 10cm x 5cm x 2cm

l

产品规格

.工作电压:100V-240VAC，50/60Hz最大功率:10W

.工作温度范围:-10°℃~50°℃。存储温度范围:-20°℃~60°℃。工作湿度范围:10%~90% RH

05701-A-0502 Honeywell

这些模块的内置信号调理功能可直接与高压、安枵,以及低压信号、热电偶、RTD和桥接电路(咖如应变片)相连接。所有模块具有配电桥接可轻松配合双线电流回路传感器的使用。所有模块的输

入通道和背板之间有230oVms跺态过电压保护。为使安装和设置更为轻松CompcFie dPoint模拟输入模块均支持热插拔即插即用)操作,可祜配置软件自动检测并辨认。同时自动定标功能使

您不必将电平转换为2进制即可对模块以工程单位进行读写，实现了软件开发的简化。所有模块均附有NST校准认证书以确保精确可靠的模拟测量。

模拟输入是指传统方式的输入数字输入是输八PCcM数字信号即o,1的二进制数字信号，通过数模转换转换成模拟信号经前级放大进入功率放大器功率放大器还是模拟的。CompactFieldPoint拥有各种精确测量模拟传感器的模拟输入模块。

HONEYWELLO5701-A-502是一款高性能的电源适配器，适用于各种电子设备。它具有良好的稳定性和高效性能，能够为您的设备提供可靠的电源支持。

控制平面

05701-A-0502 HONEYWELL设备的控制平面由主控板以及接口板的管理单元组成。控制管理平面完成系统的控制管理功能，是整个系统的中枢神经系统。控制平面完成系统的协议处理、业务处理、路由运算、转发控制、业务调度、流量统计、系统安全等功能。交换机的控制平面用于控制和管理所有网络协议的运行。控制平面提供了数据平面数据处理转发前所必须的各种网络信息和转发查询表项。

05701-A-0502 HONEYWELL电源适配器 是系统的中枢神经

05701-A-0502 HONEYWELL power adapter

Product parameter

Brand :HONEYWELL

· Model :05701-A-0502

· Weight: 100g

Shell material: plastic

Size: 10cm x 5cm x 2cm

l

Product specification

Working voltage :100V-240VAC, 50/60Hz Maximum power :10W

Operating temperature range :-10° C ~50° C. Storage temperature range :-20° C to 60° C. Operating humidity range: 10%-90%RH

05701-A-0502 Honeywell

The built-in signal conditioning function of these modules can be directly connected to high-voltage, dinnerless, as well as low-voltage signals, thermocouples, RTDS and bridge circuits (e.g. strain gauges). All modules feature distribution Bridges for easy use with two-wire current loop sensors. All modules are lost

There is 230oVms stomping overvoltage protection between the inlet channel and the backplane. In order to make installation and setup easier, CompcFie dPoint analog input modules support hot swap (plug and play) operation, which can be automatically detected and recognized by the configuration software. At the same time, the automatic calibration function enables

You can read and write modules in engineering units without having to convert levels to binary, simplifying software development. All modules come with an NST calibration certificate to ensure accurate and reliable analog measurements.

Analog input refers to the traditional way of input digital input is the input of eight PCcM digital signal, that is, o,1 binary digital signal, through digital-to-analog conversion into analog signal through the pre-stage amplification into the power amplifier power amplifier or analog. CompactFieldPoint has a variety of analog input modules for accurate measurement of analog sensors.

HONEYWELLO5701-A-502 is a high performance power adapter for a wide range of electronic devices. It has good stability and efficient performance, and can provide reliable power support for your equipment.

Control plane

The 05701-A-0502 HONEYWELL device control plane consists of the main control board and the management unit of the interface board. The control management plane completes the control and management function of the system and is the central nervous system of the whole system. The control plane performs functions such as protocol processing, service processing, routing calculation, forwarding control, service scheduling, traffic statistics, and system security. The control plane of a switch is used to control and manage the running of all network protocols. The control plane provides various network information and forwarding query entries required by the data plane before data processing and forwarding.