05701-A-0361  HONEYWELL  工程卡 激活光敏装置

制造商:霍尼韦尔

·产品编号:05701-A-0361

·产品类型:工程卡

·对其电路组件的操作、软件操作和背板通信进行自我验证。时间和日期参考。24V直流输入从dc输入卡到机架底板的布线。

霍尼韦尔系统配置

1、控制处理器

2、容错以太网桥(FTEB)

3.Controlnet接口(CNI)

4、冗余模块(RM)

5.IOLIM(输入/输出链路接口模块)

6.PM输入/输出模块

7.FTA卡

规格:

类型:绝对

端口类型:单端口

。电气连接:帕卡德Metri-Pack 150,3针。

材质:不锈钢

。电源电压:5VDC+/-0.5VDC

超压:2倍满量程

爆破压力:5X满量程

应用:霍尼韦尔05701-A-0361适用于各种应用，包括:工业过程控制

·液压和气动系统医疗设备

暖通空调系统。汽车测试和监控

05701-A-0361中的离散I/O模块也称为“数字IVO”，指的是处于两种状态之一的数据:开或关。这些信号也被称为1和0，或开和关。学习PLC编程时，离散lo通常比模拟lo简单得多。离散IO的一个例子是按钮开关，它使用压力来关闭和打开电机。接近开关也是离散IO的一个示例，因为它们可以在没有物理接触的情况下检测到对象的存在，无需使用外力即可关闭或打开。当PLC接收到来自离散输入通道的信号时，它会意识到离散传感器的状态。分立输入模块内通常有一组发光二极管(led ),当设备打开时，这些二极管就会通电。当光敏设备感应到LED时，它就会打开，从而激活PLC内存中的LED.

然后，PLC通过离散输出通道将这些信息发送给控制设备。类似地，PLC发送LED信号，激活光敏装置。当通过PLC的计算机电路发送时，这些电力负载允许控制设备，如电机启动器或指示灯，运行。

产品详情

1)新

2)保修期:12个月!

3）包装:原包装与纸箱。

4)交货时间:付款后3天内发货

5)所有货物将在发货前进行测试。

05701-A-0361  HONEYWELL  工程卡 激活光敏装置

Manufacturer: Honeywell

· Product Number :05701-A-0361· Product type: Engineering Card

· Self-verify the operation of its circuit components, software operation, and backplane communications. Time and date reference. 24V dc input Wiring from the DC input card to the chassis floor.

Honeywell system configuration

1. Control the processor

2. Fault-tolerant Ethernet Bridge (FTEB)

3.Controlnet Interface (CNI)

4. Redundant Modules (RM)

5.IOLIM(Input/Output Link Interface Module)

6.PM input/output module

7.FTA card

Specifications:

Type: Absolute

Port type: Single port

. Electrical connection: Packard Metr-Pack 150,3 pins.

Material: Stainless steel

. Power supply voltage :5VDC+/-0.5VDC

Overpressure :2 times full scale

Burst pressure :5X full scale

Applications: Honeywell 05701-A-0361 is suitable for a variety of applications, including: industrial process control

· Medical equipment for hydraulic and pneumatic systems

Hvac system. Automotive testing and monitoring

The discrete I/O module in 05701-A-0361 is also called a "digital IVO" and refers to data that is in one of two states: on or off. These signals are also known as 1s and 0s, or on and off. When learning PLC programming, discrete lo is usually much simpler than analog lo. An example of discrete IO is a push button switch, which uses pressure to turn the motor off and on. Proximity switches are also an example of discrete IO, as they can detect the presence of an object without physical contact and can be turned off or on without the use of an external force. When the PLC receives a signal from the discrete input channel, it becomes aware of the status of the discrete sensor. There is usually a set of light-emitting diodes (leds) within the discrete input module, which are energized when the device is turned on. When the photosensitive device senses the LED, it turns on, thus activating the LED in the PLC memory.

The PLC then sends this information to the control device through discrete output channels. Similarly, the PLC sends an LED signal to activate the photosensitive device. When sent through the PLC's computer circuitry, these electrical loads allow control devices, such as motor starters or indicators, to operate.

Product details

1) New

2) Warranty period :12 months!

3) Packaging: original packaging and carton.

4) Delivery time: Delivery within 3 days after payment

5) All goods will be tested before shipment.