HONEYWELL CC-TAIX01 端子面板模块

HONEYWELL CC-TAIX01  端子面板模块

品牌:Honeywell

型号 ：CC-TAIX01

产品描述

HONEYWELL CC-TAIX01同样，10个输出引脚的前8个引脚寻址为Q0.0至Q0.7，其余2个引脚寻址为Q1.0至Q1.1。

HONEYWELL CC-TAIX01 模拟输入在PLC存储器中的位置使用

HONEYWELL CC-TAIX01由于存储器地址不依赖于物理I/O寄存器，因此可以由用户自行决定。定义新标签时，首先选择M(用于记忆存储)。如果标签必须是单个比特，则结构可以是M4.1，例如第5个字节的第二个比特。

如果标签必须是一个完整的字节，标签将是MB4，下一个将是MB5。随着整数大小的增加，例如一个字，MW4可能是第一个标签，但是MW6必须是下一个，因为16位字消耗两个连续的字节。双字的大小是一个字的两倍，所以MD4后面必须跟MD8。

HONEYWELL CC-TAIX01  端子面板模块

该PLC有两个模拟输入端子。由于它们不是单比特值，因此必须作为16比特字来引用。因为存储器被分成字节，所以存储一个字需要两个连续的字节。这是通过使用具有输入结构(I)的地址，将其表示为单词(W ),并确保只使用每隔一…字节地址。

Brand :Honeywell

Model: CC-TAIX01

Product description

HONEYWELL CC-TAIX01 Similarly, the first eight of the 10 output pins are addressed Q0.0 to Q0.7, and the remaining two pins are addressed Q1.0 to Q1.1.

HONEYWELL CC-TAIX01 simulates the use of input positions in PLC memory

HONEYWELL CC-TAIX01 Because the memory address does not depend on the physical I/O register, it can be decided by the user. When defining a new label, first select M(for memory storage). If the label must be a single bit, the structure can be M4.1, such as the second bit of the fifth byte.

If the label had to be a full byte, the label would be MB4 and the next one would be MB5. As the integer size increases, such as a word, MW4 may be the first label, but MW6 must be the next, because the 16-bit word consumes two consecutive bytes. A double word is twice the size of a single word, so MD4 must be followed by MD8.

The PLC has two analog input terminals. Since they are not single-bit values, they must be referenced as 16-bit words. Because memory is divided into bytes, it takes two consecutive bytes to store a word. This is done by using an address with an input structure (I), representing it as a word (W), and ensuring that only every other... Byte address.